How to upgrade your computer's RAM

This requires basic knowledge about RAM so if you have not read one of my previous posts please read the following post:  http://neptunecustomsystems.blogspot.in/2012/08/choosing-ram-for-your-new-computer.html



Assuming you have read my previous post or if you already know about RAM and how to select good RAM for your PC then grab a few tools and read on.

Tools Required

1. A Phillips head screwdriver - A medium size will do however if you have a case with thumbscrews then you won't need one

2. Compressed air or a lint free cloth(OPTIONAL) - I would recommend these because when you first open up you PC you're going to see a lot of dust and so might as well clean the thing since its open

STEP 1:

Open up the side panel of your PC by removing screws or thumbscrews

Like this:

STEP 2:

Once you have removed the side panel take a good look and locate the DIMM sockets.

They should look like this:

The sockets in the picture are empty so the sockets in your computer might have a stick or two of RAM already. That's your old RAM

STEP 3:

Remove any old RAM modules

Push on the two tabs as shown in the picture and the stick should pop out 

Try to hold the RAM by the sides only as they are sensitive to ESD

STEP 4:

Install new RAM by inserting it perpendicularly while the white tabs are open. Push down on the RAM until the white tabs close by themselves.This ensures a proper fit

STEP 5:

Boot up PC and check the amount of RAM it detects

If your PC does not detect the new RAM check that the RAM is seated properly into the socket

Thank you for reading this article.If you have any questions feel free to message my or email me at jaideeptw@yahoo.com